Check against delivery!
Ladies and Gentlemen,
On behalf of the Executive Board, I would also like to warmly welcome you to our 112th Annual General Meeting in Bielefeld.
The financial year 2013 was once again a successful year: We were able to improve the quality of earnings in a challenging market environment. We have achieved the highest earnings before taxes (EBT) and the highest annual profit in the company’s history. The year was not marked only by our commercial success: on 1 October 2013 GILDEMEISTER Aktiengesellschaft became DMG MORI SEIKI AKTIENGESELLSCHAFT and, in Japan, MORI SEIKI Co., Ltd., became the DMG MORI SEIKI COMPANY LIMITED. Together we appear worldwide under the brand name DMG MORI: two strong companies in a leading international machine tool building partnership.
We have reached our goals for financial year 2013. Here are most important key figures: Order intake reached € 2,101.1 million. Sales revenues rose to € 2,054.2 million. Thus we have clearly outperformed the industry average. We were able to improve also the key earning figures: EBIT amounted to € 147.6 million, a gain of 11%. EBT rose by 12% to € 135.0 million. The annual profit in the group reached € 93.2 million (previous year: € 82.4 million), an increase of 13 %. In EBT, as in the annual profit, we have thus achieved the highest figures in the company’s history.
So that you, ladies and gentlemen, appropriately participate in our company's success, the Executive Board and the Supervisory Board suggest under Agenda item 2 of today's Annual General Meeting to distribute increased dividends of 50 cents per share for financial year 2013. This is a dividend yield of 2.2%.
International development of the machine tool industry 2013
The world market for machine tools declined in 2013. World consumption fell by 12.5% to € 59.5 billion (previous year: € 67.4 billion). The decline in Asia was 20.1% (previous year: +7.0%). Essentially this was due to the heavily corrected figures on consumption and production in China. The VDW calculates that consumption in China has fallen by 20.0% or € 4.9 billion to € 19.5 billion. Despite the decrease, the most machine tools were again sold in China in 2013. China had a 33% share of global consumption with a volume of € 19.5 billion (previous year € 24.4 billion). The second most important market for machines tools in 2013 was the USA with consumption of € 6.1 billion (previous year: € 6.8 billion; -11.2%). In the third largest market, Germany , consumption rose by 6.9% to € 5.4 billion. Of this, € 3.7 billion was attributed to the relevant area for us of cutting machines, which equates to 70% (previous year: € 3.9 billion; -5.7%). In Japan consumption decreased by 13.2% due to currency parities and took fourth place with € 4.0 billion (previous year: € 4.6 billion). South Korea was in fifth place as in the previous year with € 3.4 billion (previous year: € 3.4 billion; -0.3%). These five markets account for 65% of world machine tool consumption.
World production was also € 59.0 billion - a decrease of 12.5%. The world’s biggest producer of machine tools in 2013 for the fourth year in a row was China with a volume of € 13.5 billion (share: 23%; -11.8%). Japan followed with production of € 11.7 billion (20%; due to currency parities: -17%,9%) and Germany at € 11.0 billion (19%; +2.2%) was once again the third largest producer.
German Machine Tool Industry
In 2013 the German machine tool industry recorded declining order intake, yet stable production and a rise in sales revenues. At € 14.2 billion, order intake of the German machine tool builder remained 6% below the previous year’s figure (€ 15.1 billion). The production rose by 1.7% to € 13.3 billion and thus exceeded marginally the previous year’s figure (€ 13.1 billion). 69 % of machine tools manufactured in Germany were exported (previous year: 73 %).
The most important export market for German machines tools was once again China at € 2.3 billion (previous year: € 2.6 billion); this represents 25% of German machine tool exports (previous year: 27%), followed by the USA at € 900 million (10%) and Russia at € 500 million (6%).
Report on financial year 2013 of the DMG MORI SEIKI Group
We have reached our goals for financial year 2013. We were able to improve significantly the quality of earnings in a challenging market environment. EBT and the annual profit achieved the highest figures in the company’s history. This success is reflected in our share price: With growth of 41% (year-on-year), our shares were one of the MDAX winners of the year.
We have successfully expanded the cooperation with our Japanese partner. Presently, we are combining our sales and service activities in the Chinese and Russian markets; the cooperation in Canada and Brazil is being implemented. This means we are present on all the major markets worldwide and from now on can jointly exploit any growth potential.
During the reporting year we have pressed ahead our international production: the capacities in growth markets were expanded and we plan to increasingly produce on location to keep up with demand.
An important condition for strengthening our cooperation was the successful implementation of the capital increases, which we had announced in March 2013. They are an integral part of the Cooperation Agreement, in which we have set out the framework for intensifying our partnership.
With the capital increase in kind we have acquired shares in two key strategic subsidiaries of our cooperation partner. In the current financial year this will open up access for us to production capacity in Davis, USA, and to the high-precision position measuring technology of Magnescale in Japan.
The capital increase in kind was carried out with authorised capital subject to the exclusion of subscription rights. According to valid case law, the shareholders are to be informed in the next Annual General Meeting regarding the reasons for excluding subscription rights. I am happy to do this: The capital increase in kind was effective on 20 August 2013 with the entry in the Commercial Register of our company. Specifically, we have acquired a stake of 19.0% in Davis (USA) and a stake of 44.1% of Magnescale (Japan) with the capital increase in kind. In turn, 3,247,162 of our company shares were issued. This corresponds to about 5.4% of registered capital.
The acquisitions are in the strategic interest of our company. In this way, we maintain access to production capacity in the USA and to new technology in the area of position measurement technology. The acquisition of these equity interests were only possible by going the route of a capital increase in kind. The capital increase in kind fits in with the efforts of both cooperation partners to further expand and deepen the cooperation.
The specific conditions of the capital increase in kind were appropriate. This was very important to us. In determining the issue price for the new shares, we based it closely on the current share price of our company. In addition, we had PricewaterhouseCoopers confirm the fact that the value of the acquired stake corresponds to the issue price of all newly issued shares. Thus we have ruled out a value dilution for shareholders. The opposite is true - the recent development of the share price proves the fact that continual expansion of the cooperation is in the interest of you - our shareholders.
From the subscription rights capital increase we achieved net proceeds of about € 210 million. You, our shareholders, made extensive use of your pre-emptive rights. The placement ratio was 99.6% and shows the trust that you have in the development of our company and in the cooperation.
The Joint Committee has set to work. The Joint Committee is composed of senior executives from both companies. They manage and coordinate the joint worldwide activities. The accountability and decision-making powers of the Executive Board of DMG MORI SEIKI AKTIENGESELLSCHAFT shall remain unaffected hereby. With this we have implemented, in addition to the capital measures and the name change, a further important part of the Cooperation Agreement.
Ladies and Gentlemen, in the past financial year, we have compiled a report for the first time on our relationships to affiliated companies. In the dependency report pursuant to Section 312 of the German Stock Corporation Act (20.08.2013 - 31.12.2013), all transactions between us and our cooperation partner have been analysed. The results determined that all transactions were appropriate and without any disadvantages for DMG MORI SEIKI AKTIENGESELLSCHAFT. This report was audited in detail by KPMG and the Supervisory Board and approved unconditionally.
Our strategy to strengthen the cooperation was confirmed by the approval of the German antitrust authority exactly at the day of our last General Annual Meeting (17 May 2013). We are working together to ensure that our customers, employees and you, our shareholders are profiting from the expansion of our global market presence.
Despite the difficult market conditions, we were able to book order intake of € 2,101.1 million. In Germany, orders fell by 4% to € 705.8 million (previous year: € 735.8 million). In the rest of Europe, order intake was stable (€ 847.5 million; -1%). In America, the orders were 9% under the previous year's level (€ 160.1 million). In Asia, business fell by 22% to € 386.4 million, of which € 173.0 million was from China (-25%).
Sales revenues rose to € 2,054.2 million and were thus higher than the record level of the previous year. The international sales increased by 5% to € 1,377.7 million; domestic sales were € 676.5 million. The export ratio rose to 67% (previous year: 65%).
Segment Report 2013
Our business activities comprise the “Machine Tools” and ”Industrial Services” segments. The segments developed as follows:
The “Machine Tools“ segment is our core segment and includes the new machines business of the group. Sales revenues grew to € 1,209.9 million (previous year: € 1,175.0 million) and reached 59% (previous year: 58%) of group sales.
The "Industrial Services" segment contributed 41% (previous year: 42%). Overall sales revenues amounted to € 844.1 million (previous year: € 862.2 million).
As in the previous year "Corporate Services" had a share of sales revenues of under 1%.
On 31 December 2013, the order backlog at the group was € 1,031.9 million; it was thus € 28.4 million or 3% above the previous year’s figure (€ 1,003.5 million). In "Machine Tools" it was € 530.9 million. This results in a calculated production capacity of an average of some five months - a good basic capacity utilisation for the current financial year.
Results of Operations 2013
The DMG MORI SEIKI group was able to improve considerably its key earning figures at 31 December 2013 against the previous year. EBITDA rose to € 193.9 million (previous year: € 173.8 million); EBIT amounted to € 147.6 million (+11%; previous year: € 132.9 million), EBIT margin rose to 7.2% (previous year: 6.5%). EBT rose by 12% to € 135.0 million (previous year: € 120.1 million) and the annual profit reached € 93.2 million (+13%; previous year: € 82.4 million). In EBT, as in the annual profit, we have achieved the highest figures in the company’s history.
Earnings per share amount to € 1.33 (previous year: € 1.32).
DMG MORI SEIKI AKTIENGESELLSCHAFT
DMG MORI SEIKI AKTIENGESELLSCHAFT has management and holding functions. Theearnings of DMG MORI SEIKI AKTIENGESELLSCHAFT result essentially from the income of the domestic subsidiaries in the amount of € 97.9 million (previous year: € 91.1 million) and from equity investment. DMG MORI SEIKI AKTIENGESELLSCHAFT closes financial year 2013 with income for the year of € 35.2 million (previous year: € 44.9 million). Taking into account the profit carryforward of the previous year, net retained profits amount to € 39.5 million (previous year: € 24.7 million).
The Executive and Supervisory Boards propose under Agenda item 2 of today's 112th Annual General Meeting to use the net retained profits as follows:
And now a few comments on the consolidated financial statement of 2013 of the DMG MORI SEIKI group:
The number of employees rose in comparison with the previous year by 226. Thus, on 31 December 2013, the group employed 6,722 employees (previous year: 6,496) of whom 225 (previous year: 229) were trainees. In the “Machine Tools“ segment we have hired new staff at our sites in Pleszew, Bielefeld and Pfronten.
The increase in personnel in the “Industrial Services“ segment is due predominantly to the expansion of our sales and service capacity in Russia, Italy and Germany. Employee expenses rose by € 24.8 million to € 465.2 million (previous year: € 440.4 million). The personnel expenses ratio was 22.6% (previous year: 21.4%).
This is an opportunity in the name of the Executive Board and the managing directors to thank all our employees for their commitment and dedication which was crucial to our success. DMG MORI SEIKI will further expand globally and continue to be a technology leader thanks to innovations which conform to market requirements. I am firmly convinced that will we succeed in doing so together!
DMG MORI SEIKI share
DMG MORI SEIKI AKTIENGESELLSCHAFT shares recorded a positive performance in the past year and gained 41% (year-on-year) from the start of 2013. The decisive factors in this were the excellent business performance, the positive dynamic on the stock markets and the successfully implemented capital. In comparison, the MDAX achieved a gain of about 36%. In the stock market year 2013, the share was initially quoted at € 16.38 (2 January 2013) and reached its highest value of € 24.53 on 6 November 2013. The lowest value of the year was € 15.00 (5 and 8 April 2013). The share closed on 30 December 2013 at € 23.15. Currently, our share quotes at € 23.27 (XETRA closing price as at 15 May 2014).
Ladies and gentlemen, under Agenda item 5, we request you approve two supplementary agreements to existing corporate agreements with DMG Vertriebs und Service GmbH DECKEL MAHO GILDEMEISTER and GILDEMEISTER Beteiligungen GmbH. These supplementary agreements are a formality - for each agreement, one clarifying sentence has been added. The supplementary agreements are necessary due to changes in tax law requirements. There is thus no change in content of the contracts which have been valid since 2003 and 2004.
Dear shareholders, in Agenda item 6 of this Annual General Meeting, we ask you to approve the creation of newly approved capital and the corresponding change to the Articles of Association. Through the creation of a new authorisation with an authorisation amount adjusted to the current share capital number, the company should be able to keep its flexibility to react in future to strategic options when needed and/or quickly be able to acquire necessary capital on the capital markets for the further development of the company, to quickly be able to exploit favourable market conditions to cover future financing needs. Detailed explanations regarding item 6 can also be found in the Executive Board report which is available for perusal at today's Annual General Meeting. In addition, the Executive Board has made various further explanatory reports. We have made these reports known together with the invitation to the 112th Annual General Meeting and also in the Internet; also they are here at the request desk during the General Meeting. This authorisation is a purely precautionary measure.
In conclusion regarding financial year 2013:
The Executive Board has provided you with an explanatory report on statements made in the group management report pursuant to Sections 289 (4) and (5) and Section 315 (4) of the German Stock Corporation Act, which we have also published publicly on the Internet. Further details can be seen in the annual report that is displayed directly for you in front of the entrance to the hall.
And now to the figures of the 1st quarter 2014 and the outlook of the current financial year:
The beginning of the year went according to plan for DMG MORI SEIKI: At the traditional in-house exhibition at DECKEL MAHO in Pfronten, we booked order intake of € 167.6 million. There, we also presented our customers with new technology which has become known by the catch phrase "3D-printing". Our LASERTEC 65 3D machine has set a new standard. Additive manufacturing enables materials to be applied in layers. Our laser technology is used to meld individual layers together. The resulting work pieces can then be end processed with our 5-axis technology. This technology is revolutionary because metallic components can be manufactured individually, precisely and quickly.
At the CCMT which took place in 2014 in Shanghai for the first time, we presented our product range, especially from our production plants in China. This trade fair was also successful with order intake of € 16.1 million and 111 machines sold. At the METAV in Düsseldorf, we also had a positive balance - with order intake of € 47.0 million and 206 machines sold.
In its scheduled meeting of 10 March 2014, the Supervisory Board appointed Dipl.-Kfm. André Danks as a full member of the Executive Board. Since 11 March 2014, he has been responsible for finance, accounting, controlling, taxes, risk management and investor relations.
In the first quarter, order intake was € 601.2 million and thus 16% above the previous year (€ 518.7 million). In the “Machine Tools“ segment orders were € 361.8 million (previous year: € 287.7 million). The “Industrial Services“ segment recorded order intake of € 239.3 million (previous year: € 230.9 million).
Sales revenues in the first quarter were € 505.1 million and thus exceeded the previous year’s figure by € 39.0 million (+8%; € 466.1 million). In the "Machine Tools" segment, sales revenues increased by € 6.0 million to € 278.1 million (previous year: € 272.1 million). Sales revenues of the "Industrial Services" segment increased by € 33.0 million to € 226.9 million (previous year: € 193.9 million).
On 31 March 2014, order backlog within the group was € 1,128.0 million (31 December 2013: € 1,031.9 million). International orders account for 71% of existing orders. The order backlog for “Machine Tools” gives rise to a forward order book of an average of approx. five months.
The DMG MORI SEIKI group was able to improve considerably its key income figures as of 31 March 2014 compared to the previous year. EBITDA amounted to € 39.5 million (+41%; previous year: € 28.1 million), EBIT was € 28.4 million (+67%, previous year: € 17.0 million) and EBT reached € 26.1 million (+73%; previous year: € 15.1 million). As of 31 March 2014, the group reported earnings after taxes of € 18.0 million (+73%; previous year: € 10.4 million). EBT and surplus thus achieved record levels.
Outlook of the current financial year 2014
In the first months of the year, the global economic environment has developed steady on the whole. The German machine tool market has profited from this as well. In their latest forecasts (April 2014), the German Machine Tool Builders‘ Association (VDW) and the British Economic Research Institute, Oxford Economics, are projecting growth in global machine tool consumption of 3.7%.
In financial year 2014, we currently expect continued positive economic conditions on the whole. In our European core markets, we expect a further revival of the market development, especially in the second half of the year. The forecast involves risks, however, above all due to the Ukrainian conflict and the weaker economic outlook in China. As a result, an increasingly volatile economic environment could arise for the rest of the financial year 2014.
On 25 March 2014, the new cutting edge technology centre of DMG MORI Berlin was opened in Stollberg. From here, the sales and service company can attend to our customers in Eastern Germany quickly and efficiently. With the technology center in Stollberg, DMG MORI is strengthening its presence in one of the most important machine tool regions in Germany.
On 3 June 2014 we will have the grand opening of a new technology centre in Bergamo, Italy and new production of single-spindle and multi-spindle automatic lathes.
From 16 to 20 June, at the Metalloobrabotka in Moscow, DMG MORI will present 18 high-tech machines to the Russian market.
On 7 July 2014, the XXL Center - the new cutting edge production hall for our large machinery will be opened at our Pfronten location.
A highlight of the year will be the completion of our new European headquarters in Winterthur, Switzerland. Together with our cooperation partner, we will coordinate our entire European sales and service activities from Winterthur starting in November. Together we will selectively expand our global sales and service activities and press ahead with the integration and expansion of our locations.
We expect boost from the fall trade fairs, the IMTS in Chicago, AMB in Stuttgart, BIMU in Milan and JIMTOF in Tokyo. Our 19 new developments in the current year will be introduced at a total of 70 domestic and international trade fairs and in-house exhibitions which will prove the bundled innovative strength of DMG MORI.
All of this shows: we are on course. We will further intensify our global market presence and further enlarge our lead in technology. The cooperation with our Japanese partner, DMG MORI SEIKI COMPMANY LIMITED is an important element in our strategy. In addition to opening up new markets, our cooperation in future will focus more strongly on leveraging synergies in product development and production. Our goal is to create efficiency advantages when developing products by bundling our resources and using our common expertise. We want to streamline our product range, achieve purchasing advantages with consistent standardisation and thus increase our profitability. Also, we are equipping our machines with CELOS and offering them in a new corporate design.
The goal for the current financial year is to stay on course. We expect order intake of around € 2.3 billion for the current year. On the basis of current business performance and our solid order backlog, annual sales should amount to around € 2.2 billion. Assuming that market trends follow our expectations, we plan further improvement of our EBIT margin.
We plan an EBIT of around € 175 million and EBT of around € 165 million. Based on these figures, we intend to issue dividends for financial year 2014.
Ladies and Gentlemen,
we want to create long-term value to secure a permanent, stable and appropriate return on your investment. Our shares are one of the MDAX winners, with a rise in share price of 41% and dividend margin of 2.2%. Our motto for the year 2014 "One Brand for the World" stands for two strong companies in a leading international machine tool manufacturing partnership. By combining two global networks, the bundling of resources and our joint expertise, we will further strengthen our competitive edge in future. We are convinced that you, our investors and our customers, suppliers, business partners and of course our employees will profit from the synergies which result from the ever closer partnership with DMG MORI SEIKI COMPANY LIMITED. To us, your trust in us and our work is an incentive, motivation and responsibility. We will do everything to do justice to the trust you have vested in us. My Board colleagues and I lead the DMG MORI SEIKI group with the goal of long-term, constant increase in value. We are fully committed that your company remains an attractive capital investment over the long term.
Thank you for your kind attention!
Dr. Rüdiger Kapitza
Chairman of the Executive Board
16 May 2014
Do you have questions regarding our products and services?
Phone: +49 (0) 52 05 / 74 - 0
Fax: +49 (0) 52 05 / 74-30 09